• Download clockings and hours via a USB thumb drive, via the web interface or link the clock to TNA5
  • Integrated keypad and proximity reader.
  • Three relays to trigger sirens or electronic door locks.
  • Strong, but light plastic mould.
  • Supports Time and Attendance, Access Control and Job Costing*.

*Job Costing requires TNA software.



Available readers Integrated keypad and proximity reader
Proximity reader specifications Read range: +/- 12cm
Supported Data Format: ASCII, Wiegand26 and Magnetic ABA Track2
Card Format: EM 4001 or compatible
Display Four line, 20 character white font on blue background PLED
Memory Stores up to 50 000 clockings
Communications TCP/IP 10/100 Mb/s
Outputs 3 x Relays*
2 x RS485 port for connection to child clocks
1 x External USB 1.1 port
RJ-45 Ethernet connector
6-pin MiniDIN Connector
Barrel power jack
3 x additional reader connectors
Please note: All outputs are located inside the casing unless specified.
Operating temperature -15 to +70 °C
Power Supply 5V DC (supplied)
IP rating IP-50
Housing Plastic Mould
Approximate dimensions 153mm (w) x 238mm (h) x 58mm (d)
Weight 730 gram

* The relays are rated for 12V DC. Please use a siren interface if your siren or bell is rated higher.


Click on an image to enlarge the gallery.

Typing in a PIN